Welcome to Shenzhen DZ-United Technology Co.,Ltd website!

E-mail: [email protected]    简体中文 | English

Shenzhen DZ-United Technology Co.,Ltd

Wechat

Hotline: +86-755-33183903

News

Company newsPosition: Home > News > Company news

DMP series magnesium ingot automatic polishing machine

The main parameters:Overall size (excluding dust cover): 3600×3100×1250I cylinder: φ80×1000Left motor (1#): YB112-2 1.1KW 2830 rpm / polishing wheel 2000 rpmRight motor (2#): YB112-2 1.1KW 2830 rev / min Polishing wheel 2000 rev / minII cylinder: φ80×1260Left motor (3#): Y90L-2 2.2KW 2840 rpm / polishing wheel 2000 rev / minRight motor (4#): Y90L-2 2.2KW 2840 rpm / polishing wheel 2000 rev / minUpper motor (5#): Y90L-2 2.2KW 2840 rpm / polishing wheel 2000 rpmUpper motor (6#): Y90L-2 2.2KW 2840 rpm / polishing wheel 2000 rpm

2019-01-07

Congratulations on the successful convening of the ISO/TC306/WG3 working meeting!

Congratulations on the successful convening of the ISO/TC306/WG3 working meeting! As a member of the Standards Committee, Shenzhen Dingzhengxin Technology Co., Ltd. is honored to participate in the evaluation of two standards. (DZ-United Technology Vision: To be the safest magnesium alloy equipment provider in the world! Solve the magnesium-aluminum intelligent melt turnkey project for customers!)

2018-03-12

Shenzhen Die Casting Group Standards Seminar Successfully Held

Die Casting Weekly (August 31, 2017 Shenzhen) Shenzhen Die Casting Group Standards Seminar was held in Sichuan Building, Futian District, Shenzhen. Experts from the Metal Thermoforming Branch of the National Foundry Machinery Standardization Technical Committee, the Guangdong Standardization Research Institute, the Shenzhen Mechanical Engineering Society, the Shenzhen Standardization Association, and Shenzhen Lingwei Technology Co., Ltd., Shenzhen DZ-United Technology Co., Ltd. Shenzhen Yudan Electromechanical Equipment Co., Ltd., Yixiang Intelligent Equipment (Shenzhen) Co., Ltd. and other representatives from the company, the "magnesium alloy die-casting furnace terminology", "die-casting auxiliary equipment feeder" and "die-casting unit terminology" three Shenzhen The die casting group standard is discussed.Expert group and representative of participating companiesThe meeting first introduced the members of the expert group who attended the seminar. They were: Xu Niansheng, Secretary General of the Metal Thermoforming Branch of the National Foundry Machinery Standardization Technical Committee, Senior Engineer of the Company Cai Hengzhi, Liang Shujie Standardization Engineer, National Foundry Machinery Standardization Technology Member of the committee, Director of the Guangdong Provincial Institute of Standardization Gu Weixin, Professor Du Jianming from the School of Mechanical and Electrical Engineering of Shenzhen University, Ms. Dan Dan, Deputy Secretary General of Shenzhen Standardization Association, and Senior Engineer Gong Xiaoyun of Gutech (Shenzhen) Co., Ltd. Then, the director of the expert group elected Mr. Gu Weixin as the leader of the expert group.Mr. Cui Bo explained the terminology of "magnesium alloy die-casting furnace"Subsequently, the Shenzhen Die Casting Group Standards Symposium officially began. First of all, the Shenzhen Die Casting Group Standard “Magnetic Alloy Die Casting Furnace Terminology” was discussed: the members of the expert group listened carefully to the leading unit – Cui Bo, general manager of Shenzhen Dingzhengxin Technology Co., Ltd., drafted the group standard, and then A clause was carefully discussed on a case-by-case basis, and pertinent amendments and suggestions were put forward. It is understood that: Shenzhen Die Casting Group Standard "Magnesium Alloy Die Casting Furnace Terminology" mainly stipulates: the terminology and definition used in the design and production process of magnesium alloy die-casting furnace, applicable to die-casting magnesium alloy melting furnace with electric or natural gas as energy mode. Other furnaces can be referenced for implementation.Mr. Xiong Hui explained the standard of "die-casting auxiliary equipment feeder"Then, the Shenzhen Die Casting Group Standard “Die Casting Auxiliary Equipment Feeder” was thoroughly discussed. The members of the expert group listened carefully to the introduction of the standard drafting process by Mr. Xiong Hui, the general manager of the leading unit Shenzhen Qidan Electromechanical Equipment Co., Ltd. The group standard is discussed on a case-by-case basis and proposes corresponding amendments. "Die Casting Auxiliary Equipment Feeder" specifies the type and classification, requirements, test methods, inspection rules, marking, packaging, transportation, storage and operation instructions of the die-casting auxiliary equipment feeder.Mr. Shuai Huayuan explains the standard of "casting unit terminology"Finally, the group standard of the "casting unit terminology" was discussed. The members of the expert group listened carefully to the introduction of the leading unit, Shuai Huayuan, the engineering department manager of Lijin Group Shenzhen Lingwei Technology Co., Ltd., because the group standard of "casting unit terminology" is the one with the most design terms among the three group standards, the members of the expert group. Patiently and carefully discuss the terms of the standard, and make comments and suggestions. According to reports, "Die Casting Unit Terminology" stipulates the common terms and definitions of die-casting units, including die-casting machines and their auxiliary equipment, such as feeders, pick-up machines, sprayers, holding furnaces, trimming machines, conveyor belts, etc. Suitable for die-casting equipment, for the development of standards in the professional field, the preparation of technical documents and publications related to scientific literature.After the discussion of the discussion papers on the "magnesium alloy die-casting furnace terminology", "die-casting auxiliary equipment feeder" and "die-casting unit terminology" three Shenzhen die-casting group standards, the members of the expert group discussed and summarized and separately Made comprehensive and in-depth comments and suggestions. During the meeting, Ms. Liang Shujie, Metal Thermoforming Branch of the National Foundry Machinery Standardization Technical Committee, also introduced the subsidy policies for the standardization of various districts in Shenzhen.

2017-09-01

Shenzhen DZ-United Technology Co., Ltd. The 12th China International Die Casting Exhibition was a great success!

The 12th China International Die Casting Expo in Shanghai has come to an end in 2017! Shenzhen DZ-United Technology Co., Ltd. is honored to participate in the exhibition. DZ-United Technology has always been adhering to the business-oriented business philosophy of science and technology, focusing on the production and research of magnesium alloy furnace, magnesium alloy quantitative melting and holding furnace, magnesium alloy experimental furnace, manual furnace and its accessories. The company has obtained a number of patents and its products are sold at home and abroad. It is the only new four-page listed enterprise in domestic furnace enterprises! At the 12th Die Casting Exhibition in Shanghai, DZ-United shines and attracts a large number of visitors to consult and understand!Exhibition site map:

2017-07-22

All 12, Page 3/3FirstPrev123NextLast

Link:

Copyright: Shenzhen DZ-United Technology Co.,Ltd 豫ICP备43158511号 Powered by: